Rutile germanium dioxide (r-GeO2) is arising as a promising material in the field of ultra-wide bandgap semiconductors for power electronics applications. The deposition of high-quality r-GeO2 layers is crucial, but its growth kinetics is not trivial, especially when GeO desorption from the growth front is involved. While this desorption can limit the growth rate of the material, it can also be exploited for in-situ etching procedures of potential technological interest. In this work we (i) suggest a plausible reaction pathway for GeO2 deposition in metalorganic vapor phase epitaxy (MOVPE) using isobutylgermane (iBuGe) and O2 precursors, (ii) qualitatively describe the experimentally obtained temperature- and oxygen-flow-dependent growth rate by a simplified kinetic model that takes into account in termediate GeO formation and its desorption from the growth front, and (iii) demonstrate the in-situ etching of deposited amorphous GeO2 layers in the absence of O2 inside the MOVPE reactor with an etch rate controlled by the iBuGe flow rate. The kinetic model suggests the MOVPE of GeO2 to take place under a highly oxygen- rich flux stoichiometry, and predicts lower substrate temperatures (that still grant iBuGe decomposition), higher iBuGe flow rates, or higher oxygen partial pressures to increase the growth rate.

Suboxide-mediated growth kinetics and etching in the metalorganic vapor phase epitaxy of GeO2 / Cicconi, G., Bosi, M., Bierwagen, O., Baraldi, A., Mezzadri, F., Chen, W., Seravalli, L., Parisini, A., Fornari, R., Mazzolini, P.. - In: MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING. - ISSN 1369-8001. - 219:(2027). [10.1016/j.mssp.2026.111391]

Suboxide-mediated growth kinetics and etching in the metalorganic vapor phase epitaxy of GeO2

Cicconi, G.;Baraldi, A.;Mezzadri, F.;Parisini, A.;Fornari, R.;Mazzolini, P.
2027-01-01

Abstract

Rutile germanium dioxide (r-GeO2) is arising as a promising material in the field of ultra-wide bandgap semiconductors for power electronics applications. The deposition of high-quality r-GeO2 layers is crucial, but its growth kinetics is not trivial, especially when GeO desorption from the growth front is involved. While this desorption can limit the growth rate of the material, it can also be exploited for in-situ etching procedures of potential technological interest. In this work we (i) suggest a plausible reaction pathway for GeO2 deposition in metalorganic vapor phase epitaxy (MOVPE) using isobutylgermane (iBuGe) and O2 precursors, (ii) qualitatively describe the experimentally obtained temperature- and oxygen-flow-dependent growth rate by a simplified kinetic model that takes into account in termediate GeO formation and its desorption from the growth front, and (iii) demonstrate the in-situ etching of deposited amorphous GeO2 layers in the absence of O2 inside the MOVPE reactor with an etch rate controlled by the iBuGe flow rate. The kinetic model suggests the MOVPE of GeO2 to take place under a highly oxygen- rich flux stoichiometry, and predicts lower substrate temperatures (that still grant iBuGe decomposition), higher iBuGe flow rates, or higher oxygen partial pressures to increase the growth rate.
2027
Suboxide-mediated growth kinetics and etching in the metalorganic vapor phase epitaxy of GeO2 / Cicconi, G., Bosi, M., Bierwagen, O., Baraldi, A., Mezzadri, F., Chen, W., Seravalli, L., Parisini, A., Fornari, R., Mazzolini, P.. - In: MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING. - ISSN 1369-8001. - 219:(2027). [10.1016/j.mssp.2026.111391]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11381/3079774
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact