GHIO, EMANUELE
GHIO, EMANUELE
Dipartimento di Ingegneria dei Sistemi e delle Tecnologie Industriali - DISTI
A study of intermetallic phase stability in Al-Si-Mg casting alloy: The role of Cu additions
2020-01-01 Cerri, E.; Di Giovanni, M. T.; Ghio, E.
Additive Manufacturing of AlSi10Mg and Ti6Al4V Lightweight Alloys via Laser Powder Bed Fusion: A Review of Heat Treatments Effects
2022-01-01 Ghio, E; Cerri, E
Aging Profiles of AlSi7Mg0.6 and AlSi10Mg0.3 Alloys Manufactured via Laser-Powder Bed Fusion: Direct Aging versus T6
2022-01-01 Cerri, E.; Ghio, E.
Aging response in Selective Laser Melted AlSi10Mg alloy as function of distance from the substrate plate
2021-01-01 Cerri, Emanuela; Ghio, Emanuele
AlSil0Mg alloy produced by Selective Laser Melting: relationships between Vickers microhardness, Rockwell hardness and mechanical properties
2020-01-01 Cerri, E; Ghio, E
Change in Mechanical Properties of Laser Powder Bed Fused AlSi7Mg Alloy during Long-Term Exposure at Warm Operating Temperatures
2023-01-01 Cerri, Emanuela; Ghio, Emanuele
Characterization of AlCrN films deposited on selective laser melted Ti6Al4V substrates
2024-01-01 Cerri, Emanuela; Ghio, Emanuele; Bertè, Alessandro; Paolo, Colombi; Bolelli, Giovanni
Corrosion Behaviour of High-Pressure Die-Cast AZ91 Alloy in NaCl Solution: Effects of Friction Stir Process at High Rotational Speed
2023-01-01 Ghio, Emanuele; Cerri, Emanuela
Defect-Correlated Vickers Microhardness of Al-Si-Mg Alloy Manufactured by Laser Powder Bed Fusion with Post-process Heat Treatments
2022-01-01 Cerri, Emanuela; Ghio, Emanuele; Bolelli, Giovanni
Diamond-Like Carbon (DLC) and AlCrN films onto Ti-6Al-4V substrates by Laser-Powder Bed Fusion (L-PBF): Effect of substrate heat treatment and surface finish
2023-01-01 Ghio, Emanuele; Bolelli, Giovanni; Bertè, Alessandro; Cerri, Emanuela
Durezze Vickers, Rockwell e proprietà meccaniche: correlazioni per una lega AlSi10Mg prodotta per Selective Laser Melting
2021-01-01 Cerri, E.; Ghio, E.
Effect of Friction Stir Processing at High Rotational Speed on Aging of a HPDC Mg9Al1Zn
2020-01-01 Cerri, Emanuela; Ghio, Emanuele
Effect of low-temperature annealing on creep properties of an AlSi10Mg alloy produced by additive manufacturing: experiments and modelling
2021-01-01 Paoletti, C; Cerri, E; Ghio, E; Santecchia, E; Cabibbo, M.; Spigarelli, S.
Effect of surface roughness and industrial heat treatments on the microstructure and mechanical properties of Ti6Al4V alloy manufactured by laser powder bed fusion in different built orientations
2022-01-01 Cerri, E.; Ghio, E.; Bolelli, G.
Effect of the Distance from Build Platform and Post-Heat Treatment of AlSi10Mg Alloy Manufactured by Single- and Multi-Laser Selective Laser Melting
2021-01-01 Cerri, E.; Ghio, E.; Bolelli, G.
Effetto della sabbiatura e del trattamento termico over β-transus su campioni in Ti6Al4V-ELI prodotti tramite Laser Powder Bed Fusion
2022-01-01 Cerri, E.; Ghio, E.
Mechanical properties and microstructure of Ti6Al4V extra-low interstitial alloy produced via laser and electron beam additive manufacturing processes
2022-01-01 Ghio, E.; Cerri, E.; Riccio, M.; Sisti, J.
Metallurgical analysis of laser powder bed-fused Al–Si–Mg alloys: Main causes of premature failure
2023-01-01 Cerri, Emanuela; Ghio, Emanuele
Ottimizzazione di trattamenti termici non-convenzionali per campioni di AlSi10Mg prodotti per Selective Laser Melting
2021-01-01 Cerri, E.; Ghio, E.
Revisione degli effetti di differenti trattamenti termici sulla lega AlSi10Mg prodotta per Laser Powder Bed Fusion
2022-01-01 Cerri, E.; Ghio, E.