In situ X-ray examination at a synchrotron beamline of the solution growth of self-assembled SiGe structures on silicon (001) substrates through the backside has been realized by a specific heating equipment and a suitable growth assembly. The furnace allows heating of the growth assembly up to 600 degrees C. The temperature field and the gas flow in the furnace have been numerically modeled. In this way a meaningful estimate about the power consumption and the thermal gradient across the sample has been reached. Despite its low heat capacity and, thus, fast heating and cooling ability the furnace can be stabilized to +/- 0.1 K by a high-performance temperature controller. The growth assembly has been prepared within three separate stages carried out in conventional slideboat liquid phase epitaxy equipment. Such growth assembly allows carrying out then intended experiments without H, as normally used in liquid phase epitaxy in favor of N(2), meeting the demand of minimized risks at beamlines. The equipment ensures an easy handling of the growth assembly. (C) 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Liquid phase epitaxy set-up designed for in situ X-ray study of SiGe island growth on (001) Si substrates / T., Teubner; U., Jendritzki; K., Bottcher; G., Schadow; R., Heimburger; A. K., Gerlitzke; S., Deiter; C., Eisenschmidt; T., Boeck; Fornari, Roberto; M., Hanke. - In: CRYSTAL RESEARCH AND TECHNOLOGY. - ISSN 0232-1300. - 43:(2008), pp. 1278-1285. [10.1002/crat.200800290]

Liquid phase epitaxy set-up designed for in situ X-ray study of SiGe island growth on (001) Si substrates

FORNARI, Roberto;
2008-01-01

Abstract

In situ X-ray examination at a synchrotron beamline of the solution growth of self-assembled SiGe structures on silicon (001) substrates through the backside has been realized by a specific heating equipment and a suitable growth assembly. The furnace allows heating of the growth assembly up to 600 degrees C. The temperature field and the gas flow in the furnace have been numerically modeled. In this way a meaningful estimate about the power consumption and the thermal gradient across the sample has been reached. Despite its low heat capacity and, thus, fast heating and cooling ability the furnace can be stabilized to +/- 0.1 K by a high-performance temperature controller. The growth assembly has been prepared within three separate stages carried out in conventional slideboat liquid phase epitaxy equipment. Such growth assembly allows carrying out then intended experiments without H, as normally used in liquid phase epitaxy in favor of N(2), meeting the demand of minimized risks at beamlines. The equipment ensures an easy handling of the growth assembly. (C) 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
2008
Liquid phase epitaxy set-up designed for in situ X-ray study of SiGe island growth on (001) Si substrates / T., Teubner; U., Jendritzki; K., Bottcher; G., Schadow; R., Heimburger; A. K., Gerlitzke; S., Deiter; C., Eisenschmidt; T., Boeck; Fornari, Roberto; M., Hanke. - In: CRYSTAL RESEARCH AND TECHNOLOGY. - ISSN 0232-1300. - 43:(2008), pp. 1278-1285. [10.1002/crat.200800290]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11381/2683953
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 3
  • ???jsp.display-item.citation.isi??? 2
social impact