Wall curvature represents one of the most used passive techniques to enhance convective heat transfer. The effectiveness of wall curvature is due to the fact that it gives origin to the centrifugal force: this phenomenon induces local maxima in the velocity distribution that locally increase the temperature gradients at the wall by then maximizing the heat transfer. This fact brings to a significant variation of the wall temperature and of the wall heat flux along the circumferential coordinate. The convective heat transfer coefficient is consequently not uniformly distributed along the tube’s perimeter and is characterized by higher values at the extrados wall surface in comparison to the ones at the intrados wall surface. Therefore, for predicting the overall performance of heat transfer apparatuses that involve the use of curved tubes, it becomes important to know the local distribution of the convective heat transfer coefficient not only along the axis of the heat transfer section, but also on the internal tube’s surface along the cross section circumference. The present paper is intended to the assessment of a procedure developed to evaluate the local convective heat transfer coefficient, along the circumferential coordinate, at the internal wall of a coiled pipe.

Inverse estimation of the local heat transfer coefficient in curved tubes: a numerical validation / Bozzoli, Fabio; Cattani, Luca; Corradi, Carlo; Mordacci, Marco; Rainieri, Sara. - (2013), pp. 1-11. (Intervento presentato al convegno XXXI UIT heat Transfer Conference tenutosi a Como nel 25-27 Giugno 2013).

Inverse estimation of the local heat transfer coefficient in curved tubes: a numerical validation

BOZZOLI, Fabio;CATTANI, Luca;CORRADI, Carlo;MORDACCI, Marco;RAINIERI, Sara
2013-01-01

Abstract

Wall curvature represents one of the most used passive techniques to enhance convective heat transfer. The effectiveness of wall curvature is due to the fact that it gives origin to the centrifugal force: this phenomenon induces local maxima in the velocity distribution that locally increase the temperature gradients at the wall by then maximizing the heat transfer. This fact brings to a significant variation of the wall temperature and of the wall heat flux along the circumferential coordinate. The convective heat transfer coefficient is consequently not uniformly distributed along the tube’s perimeter and is characterized by higher values at the extrados wall surface in comparison to the ones at the intrados wall surface. Therefore, for predicting the overall performance of heat transfer apparatuses that involve the use of curved tubes, it becomes important to know the local distribution of the convective heat transfer coefficient not only along the axis of the heat transfer section, but also on the internal tube’s surface along the cross section circumference. The present paper is intended to the assessment of a procedure developed to evaluate the local convective heat transfer coefficient, along the circumferential coordinate, at the internal wall of a coiled pipe.
2013
9788864930176
Inverse estimation of the local heat transfer coefficient in curved tubes: a numerical validation / Bozzoli, Fabio; Cattani, Luca; Corradi, Carlo; Mordacci, Marco; Rainieri, Sara. - (2013), pp. 1-11. (Intervento presentato al convegno XXXI UIT heat Transfer Conference tenutosi a Como nel 25-27 Giugno 2013).
File in questo prodotto:
File Dimensione Formato  
bozzoli_et_al_Submission.pdf

non disponibili

Tipologia: Documento in Post-print
Licenza: Creative commons
Dimensione 465.79 kB
Formato Adobe PDF
465.79 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11381/2637268
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact