Recently, conversion efficiencies close to 16% for thin film solar cells based on the CdS/CdTe heterojunction have been reported. These relevant results, however, have not yet solved the problems which arise when industrial production is undertaken as the demand for low cost imposes constraints which considerably limit the final efficiency of the cells. In this paper, we will show that very high conversion efficiencies can still be achieved even making use of low cost soda-lime glass as substrate. In fact, the Na contained in this kind of glass diffuses during the fabrication of the cell into the active layers of the device causing a substantial decrease of the fill factor and consequently of the efficiency of the cell. In particular, we will describe the methods and the magnetron sputtering techniques used to grow a polycrystalline CdS thin film with a controlled Na content. We will also describe the details of the growth via the close-spaced sublimation (CSS) technique of the CdTe polycrystalline film, which are crucial for the heterojunction and the back contact which has been fabricated exploiting the characteristics of Sb2Te3 which is a low gap p-type semiconductor with a high conductivity. (C) 2000 Elsevier Science S.A. All rights reserved.

Growth ol polycrystalline CdS and CdTe thin layers for high efficiency thin film solar cells / Romeo, Nicola; Bosio, Alessio; Tedeschi, Riccardo Alfredo Arturo; Canevari, V.. - In: MATERIALS CHEMISTRY AND PHYSICS. - ISSN 0254-0584. - 66:2-3(2000), pp. 201-206. [10.1016/S0254-0584(00)00316-3]

Growth ol polycrystalline CdS and CdTe thin layers for high efficiency thin film solar cells

ROMEO, Nicola;BOSIO, Alessio;TEDESCHI, Riccardo Alfredo Arturo;
2000-01-01

Abstract

Recently, conversion efficiencies close to 16% for thin film solar cells based on the CdS/CdTe heterojunction have been reported. These relevant results, however, have not yet solved the problems which arise when industrial production is undertaken as the demand for low cost imposes constraints which considerably limit the final efficiency of the cells. In this paper, we will show that very high conversion efficiencies can still be achieved even making use of low cost soda-lime glass as substrate. In fact, the Na contained in this kind of glass diffuses during the fabrication of the cell into the active layers of the device causing a substantial decrease of the fill factor and consequently of the efficiency of the cell. In particular, we will describe the methods and the magnetron sputtering techniques used to grow a polycrystalline CdS thin film with a controlled Na content. We will also describe the details of the growth via the close-spaced sublimation (CSS) technique of the CdTe polycrystalline film, which are crucial for the heterojunction and the back contact which has been fabricated exploiting the characteristics of Sb2Te3 which is a low gap p-type semiconductor with a high conductivity. (C) 2000 Elsevier Science S.A. All rights reserved.
2000
Growth ol polycrystalline CdS and CdTe thin layers for high efficiency thin film solar cells / Romeo, Nicola; Bosio, Alessio; Tedeschi, Riccardo Alfredo Arturo; Canevari, V.. - In: MATERIALS CHEMISTRY AND PHYSICS. - ISSN 0254-0584. - 66:2-3(2000), pp. 201-206. [10.1016/S0254-0584(00)00316-3]
File in questo prodotto:
File Dimensione Formato  
artic-9.pdf

non disponibili

Tipologia: Documento in Post-print
Licenza: Creative commons
Dimensione 280.64 kB
Formato Adobe PDF
280.64 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11381/2298114
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 72
  • ???jsp.display-item.citation.isi??? 61
social impact