The mechanical and microstructural properties of 6061 + 20% Al(2)O(3)p and 7005 + 10% Al(2)O(3)p aluminium based metal matrix composites joined by friction stir welding were analyzed in the present study. The two materials were welded into the form of sheets of 7 mm thickness after T6 treatment and were tested in tension at room temperature. The microstructure of the joints was observed by optical microscopy and the fracture surfaces were analyzed by employing a scanning electron microscope equipped with field emission gun in order to study the micromechanisms involved during the deformation.
Erratum: Friction stir welding of ceramic particle reinforced aluminium based metal matrix composites (Applied Composite Materials (2004) 11: 4 (247-258)) / Cavaliere, P.; Cerri, E.; Leo, P.; Marzoli, L.; Santos, J. D.. - In: APPLIED COMPOSITE MATERIALS. - ISSN 0929-189X. - 11:6(2004), pp. 399-399. [10.1023/B:ACMA.0000045336.48648.fa]
Erratum: Friction stir welding of ceramic particle reinforced aluminium based metal matrix composites (Applied Composite Materials (2004) 11: 4 (247-258))
Cerri E.;
2004-01-01
Abstract
The mechanical and microstructural properties of 6061 + 20% Al(2)O(3)p and 7005 + 10% Al(2)O(3)p aluminium based metal matrix composites joined by friction stir welding were analyzed in the present study. The two materials were welded into the form of sheets of 7 mm thickness after T6 treatment and were tested in tension at room temperature. The microstructure of the joints was observed by optical microscopy and the fracture surfaces were analyzed by employing a scanning electron microscope equipped with field emission gun in order to study the micromechanisms involved during the deformation.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
