The global issue of contamination and power reserves has given dimethyl ether (DME) considerable attention. It is an encouraging and clean green material for the future resulting from its clean combustion properties. In this paper, a novel MCM-41-propyl-SO3H catalyst was successfully prepared with tethering of the active sulfonic acid groups onto the support via covalent bonds. This material was investigated as catalyst for DME synthesis via methanol dehydration in a fixed bed flow reactor at different experimental settings. TGA, NH3-TPD, SEM, XRD and BET techniques​ were utilized to characterize the synthesized material. MCM-41 sulfonated catalyst showed great thermal stability, high surface area and significant acid loading. The catalytic tests also demonstrated that the maximum methanol conversion was observed at 350 °C and catalyst contact time of 8 s. In addition, the catalyst showed a total selectivity to DME; light hydrocarbons and higher oxygenated compounds were not formed at temperatures above 300° C.

Effect of acidic MCM-41 mesoporous silica functionalized with sulfonic acid groups catalyst in conversion of methanol to dimethyl ether / Viscardi, R.; Barbarossa, V.; Maggi, R.; Pancrazzi, F.. - In: ENERGY REPORTS. - ISSN 2352-4847. - 6:(2020), pp. 49-55. [10.1016/j.egyr.2020.10.042]

Effect of acidic MCM-41 mesoporous silica functionalized with sulfonic acid groups catalyst in conversion of methanol to dimethyl ether

Maggi R.;Pancrazzi F.
2020-01-01

Abstract

The global issue of contamination and power reserves has given dimethyl ether (DME) considerable attention. It is an encouraging and clean green material for the future resulting from its clean combustion properties. In this paper, a novel MCM-41-propyl-SO3H catalyst was successfully prepared with tethering of the active sulfonic acid groups onto the support via covalent bonds. This material was investigated as catalyst for DME synthesis via methanol dehydration in a fixed bed flow reactor at different experimental settings. TGA, NH3-TPD, SEM, XRD and BET techniques​ were utilized to characterize the synthesized material. MCM-41 sulfonated catalyst showed great thermal stability, high surface area and significant acid loading. The catalytic tests also demonstrated that the maximum methanol conversion was observed at 350 °C and catalyst contact time of 8 s. In addition, the catalyst showed a total selectivity to DME; light hydrocarbons and higher oxygenated compounds were not formed at temperatures above 300° C.
2020
Effect of acidic MCM-41 mesoporous silica functionalized with sulfonic acid groups catalyst in conversion of methanol to dimethyl ether / Viscardi, R.; Barbarossa, V.; Maggi, R.; Pancrazzi, F.. - In: ENERGY REPORTS. - ISSN 2352-4847. - 6:(2020), pp. 49-55. [10.1016/j.egyr.2020.10.042]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11381/2887157
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 10
  • ???jsp.display-item.citation.isi??? 10
social impact