This paper describes some development in experimental and numerical procedures to estimate friction torque on a rotating shaft due to radial elastomeric seals. Different test rigs have been built, in order to highlight the relationship between the overall friction and the local behavior of each lip portion in presence of dynamic eccentricities. A direct measurement has been performed with a rotating shaft machine and results have been compared with the torque calculated as product of a global frictional coefficient and the normal stress on the lip surface. The latter has been computed by a FEM simulation which has been optimized to evaluate the lip deformation due to mounting interference. Experimental results about radial and tangential oscillation of a limited lip region, repeated for different elastomer, allowed to calculate the frictional coefficient as the ratio of the friction force and the force pressing the lip on the shaft surface in some cases of practical interest.

Frictional Behavior of Radial Lip Seals under Dynamic Operating Conditions for Different Elastomer Rings / Silvestri, Marco; Prati, Edzeario; Tasora, Alessandro. - (2007), pp. 121-134. (Intervento presentato al convegno 19th International Conference on Fluid Sealing tenutosi a Poitiers, France nel 25-26 September 2007).

Frictional Behavior of Radial Lip Seals under Dynamic Operating Conditions for Different Elastomer Rings

SILVESTRI, Marco;PRATI, Edzeario;TASORA, Alessandro
2007-01-01

Abstract

This paper describes some development in experimental and numerical procedures to estimate friction torque on a rotating shaft due to radial elastomeric seals. Different test rigs have been built, in order to highlight the relationship between the overall friction and the local behavior of each lip portion in presence of dynamic eccentricities. A direct measurement has been performed with a rotating shaft machine and results have been compared with the torque calculated as product of a global frictional coefficient and the normal stress on the lip surface. The latter has been computed by a FEM simulation which has been optimized to evaluate the lip deformation due to mounting interference. Experimental results about radial and tangential oscillation of a limited lip region, repeated for different elastomer, allowed to calculate the frictional coefficient as the ratio of the friction force and the force pressing the lip on the shaft surface in some cases of practical interest.
2007
9781855980914
Frictional Behavior of Radial Lip Seals under Dynamic Operating Conditions for Different Elastomer Rings / Silvestri, Marco; Prati, Edzeario; Tasora, Alessandro. - (2007), pp. 121-134. (Intervento presentato al convegno 19th International Conference on Fluid Sealing tenutosi a Poitiers, France nel 25-26 September 2007).
File in questo prodotto:
File Dimensione Formato  
article-silvestri-bhr07reviewed.pdf

non disponibili

Tipologia: Documento in Post-print
Licenza: Creative commons
Dimensione 598.31 kB
Formato Adobe PDF
598.31 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11381/1649185
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact