Recently both d-q and instantaneous symmetrical components (i.s.c.) models for faulty cage induction machines have been proposed for numerical simulations of stator instantaneous currents. Applying FFT algorithm to stator current the sideband components at frequencies (1±2s)f can be evaluated. The amplitudes of these components are commonly used as diagnostic index to assess rotor condition in the MCSA diagnostic procedures. With the assumption of infinite machine-load combined inertia value or ideal speed control the speed ripple due to rotor asymmetry will not be present. Steady-state conditions can be considered and only the component at frequency (1-2s)f will appear. If the above assumption does not hold, the (1-2s)f component correspond to the sum of the two sideband lines. In any case the parameterization, i.e. the definition of an asymmetry factor used as diagnostic index to define the fault severity, is a key item. The simplest asymmetry factor may be the definition of an equivalent additional resistance ΔRr linked to the number of contiguous broken bars. In this paper the proposals about the quantization of ΔR r found in the literature are reviewed and compared with reference to one broken bar. A new proposal is also presented and its effectiveness is proven.

Diagnostic of induction machines by d-q and i.s.c. rotor models / Bellini, A.; Filippetti, F.; Franceschini, Giovanni; Sobczyk, T. J.; Tassoni, Carla. - (2005). (Intervento presentato al convegno IEEE Sdemped 2005 Symposium on Diagnostic for Electric Machines, Power Electronics and Drives tenutosi a Vienna, Austria nel Sept. 7-9 2005) [10.1109/DEMPED.2005.4662533].

Diagnostic of induction machines by d-q and i.s.c. rotor models

FRANCESCHINI, Giovanni;TASSONI, Carla
2005-01-01

Abstract

Recently both d-q and instantaneous symmetrical components (i.s.c.) models for faulty cage induction machines have been proposed for numerical simulations of stator instantaneous currents. Applying FFT algorithm to stator current the sideband components at frequencies (1±2s)f can be evaluated. The amplitudes of these components are commonly used as diagnostic index to assess rotor condition in the MCSA diagnostic procedures. With the assumption of infinite machine-load combined inertia value or ideal speed control the speed ripple due to rotor asymmetry will not be present. Steady-state conditions can be considered and only the component at frequency (1-2s)f will appear. If the above assumption does not hold, the (1-2s)f component correspond to the sum of the two sideband lines. In any case the parameterization, i.e. the definition of an asymmetry factor used as diagnostic index to define the fault severity, is a key item. The simplest asymmetry factor may be the definition of an equivalent additional resistance ΔRr linked to the number of contiguous broken bars. In this paper the proposals about the quantization of ΔR r found in the literature are reviewed and compared with reference to one broken bar. A new proposal is also presented and its effectiveness is proven.
2005
978-078039124-6
Diagnostic of induction machines by d-q and i.s.c. rotor models / Bellini, A.; Filippetti, F.; Franceschini, Giovanni; Sobczyk, T. J.; Tassoni, Carla. - (2005). (Intervento presentato al convegno IEEE Sdemped 2005 Symposium on Diagnostic for Electric Machines, Power Electronics and Drives tenutosi a Vienna, Austria nel Sept. 7-9 2005) [10.1109/DEMPED.2005.4662533].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11381/1445036
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 28
  • ???jsp.display-item.citation.isi??? ND
social impact